Sections in this article
- DOA
- DOD
- FHI
- FLO
- GRP
- HDV
- IVF
- LDV
- LS1
- LS2
- LS3
- LTM
- NDD
- ND1
- ND2
- ND3
- OBS
- OC
- OCR
- OC0
- OC2
- OC3
- OC4
- OUT
- OVG
- OVR
- PDT
- PE
- PE1
- PE2
- PE3
- PE4
- PE5
- PE6
- PE7
- PE8
- PE9
- PSD
- PSL
- PSN
- PSR
- PSS
- PUF
- PUM
- PUP
- PUW
- QRY
- Q01
- ST2
- ST3
- ST4
- ST5
- W
- WP1
- WP2
- WS1
- ZCG
- ZNW
- ZRM
- ZY1
- ZY2
- Z00
- Z10
DOA
Description:
This batch looks at all slow moving products. From the last 6 periods, there has to be at least one demand occurance on a product.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: DOA
Table Code Description 1: Demand occurences-All products
Table Code Description 2:
Table Code Description 3: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Table Flag 1: 0
Table Flag 3: 0
Program Used In:
- K3S_FX550C
- K3S_3100
- K3S_3110
- AR_ADDBACH
- AR_DOABCHS
- AR_DODBCHS
DOD
Description:
This batch looks at slow moving products that have been discontinued. From the last 6 periods, there has to be at least one demand occurance on a product.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Description 1: Demand occurences-Discontinued
Table Code Description 2:
Table Code Description 3: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Table Flag 1: 0
Table Flag 3: 0
Program Used In:
- K3S_FX550C
- K3S_3100
- K3S_3110
- AR_ADDBACH
- AR_DODBCHS
FHI
Description:
Batch type - Forecast too high
This batch brings up products whose forecast (average) is higher than last period’s demand.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: FHI
Table Code Description 1: Forecast too high
Table Flag 1: 0
Table Flag 3: 0
Program Used In:
- K3S_3110
- AR_FHIBCHS
FLO
Description:
Batch type - Forecast too low
This batch brings up products whose forecast (average) is lower than last period’s demand.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: FLO
Table Code Description 1: Forecast too low
Table Flag 1: 0
Table Flag 3: 0
Program Used In:
- K3S_3110
- AR_FLOBCHS
GRP
Description:
Batch type - Supplier Product group batches.
This batch brings will gather products from suppliers matching the supplier groups entered, or products matching the product groups entered.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: GRP
Table Code Description 1: Supplier Product Group Batch
Table Flag 1: 0
Table Flag 3: 0
Program Used In:
- AR_GRPBCHS
HDV
Description:
Batch type - High Deviation %
This batch will grab all products with a high deviation larger than the set value percentage.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: HDV
Table Code Description 1: High Deviation %
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3085
- K3S_3100
- K3S_3110
- AR_HDVBCHS
IVF
Description:
This batch is ran to identify data that does not make sense. If a product has inventory that then disappers (or floats) that product would show up in this report. If onhand quantity for today matches two days ago, yesterday shows 0 on hand, and today it show lost sales, then include in the IVF batch.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: IVF
Table Code Description 1: Inventory float
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3100
- K3S_3110
- AR_ADDBACH
- AR_IVFBCHS
LDV
Description:
Batch type - Low Deviation %
This batch will grab all products with a low deviation smaller than the set value percentage.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: LDV
Table Code Description 1: Low Deviation %
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3085
- K3S_3100
- K3S_3110
- AR_LDVBCHS
LS1
Description:
Batch type - Lost sales last night onhand > 0
This batch type will grab all lost sales with an on hand greater than 0
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: LS1
Table Code Description 1: Lost sales last night onhand>0
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3100
- K3S_3110
- AR_ADDBACH
- AR_LS1BCHS
LS2
Description:
Batch type - Lost sales last night onhand = 0
This batch type will grab all lost sales with an on hand equal to 0
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: LS2
Table Code Description 1: Lost sales last night onhand=0
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3100
- K3S_3110
- AR_ADDBACH
- AR_LS2BCHS
LS3
Description:
Batch type - Lost sales last night LS1+LS2
This batch type will grab all lost sales with an on hand greater than or equal to 0
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: LS3
Table Code Description 1: Lost sales last night LS1+LS2
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3100
- K3S_3110
- AR_ADDBACH
- AR_LS3BCHS
LTM
Description:
This batch will include products who have a lead time %150 greater that the supplier lead time for orders. This will not include discontinued products.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: LTM
Table Code Description 1: Lead time exceptions
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3100
- K3S_3110
- AR_ADDBACH
- AR_LTMBCHS
NDD
In the process for development
ND1
Description:
This batch will include all products that have not had demand in the past year.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: ND1
Table Code Description 1: No demand for 1 year
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3110
- AR_CNDBCHS
- AR_NDDBCHS
- AR_ND1BCHS
ND2
Description:
This batch will include all products that have not had demand in the past 2 years.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: ND2
Table Code Description 1: No demand for 2 years
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3110
ND3
Description:
This batch will include all products that have not had demand in the past 3 years.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: ND3
Table Code Description 1: No demand for 3 years
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3110
- AR_CNDBCHS
- AR_NDDBCHS
- AR_ND3BCHS
OBS
Description:
This batch will include all products that have products that have no demand.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: OBS
Table Code Description 1: Obsolete products
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3110
- AR_LSTORDR
- AR_OBSBCHS
- AR_OBSREPT
OC
Obsolete batch type. No longer in use in R6.
OCR
Description:
Runs through every supplier and is testing for the best fit order cycle.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: OCR
Table Code Description 1: Best Fit Order Cycle
Table Flag 1: 1
Program Used In:
- AR_BFTBACH
- AR_OCRBCHS
OC0
Obsolete batch type. No longer in use in R6.
OC2
Obsolete batch type. No longer in use in R6.
OC3
Obsolete batch type. No longer in use in R6.
OC4
Obsolete batch type. No longer in use in R6.
OUT
Description:
This batch will include all products that were marked as ‘Out of Stock’ from the K3S night job.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: OUT
Table Code Description 1: Out of stock last night
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3110
- AR_OUTBCHS
OVG
Description:
This batch is used to find demand occurrences in discontinued products.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: OVG
Table Code Description 1: Gather OV checks to 1 location
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3100
- K3S_3110
- AR_ADDBACH
- AR_OVGBCHS
OVR
Description:
This batch will include all overstocked products.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: OVR
Table Code Description 1: Overstocked products
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3100
- K3S_3110
- AR_ADDBACH
- AR_OVRBCHS
Description:
This will include all products that product link “from” products
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: PDF
Table Code Description 1: Products link type D - From
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3100
- K3S_3110
- AR_APRORDR
- AR_PDFBCHS
PDT
Description:
This will include all products that product link “to” products
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: PDT
Table Code Description 1: Products link type D - To
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_FX520D
- K3S_3100
- K3S_3110
- K3S_5300
- AR_ADPDEAL
- AR_DLPDEAL
- AR_PDTBCHS
- AR_UPPDEAL
PE
Description:
This batch will include all products with a period end type.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: PE
Table Code Description 1: All period end types
Table Flag 1: 1
Table Flag 3: 1
Program Used In:
- K3S_FX510E
- K3S_3080
- K3S_3110
- K3S_7140
PE1
Description:
This batch will display all products whose demand was much higher than that of the average in the last period.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: PE1
Table Code Description 1: Demand filter high check
Table Flag 1: 1
Table Flag 3: 1
Program Used In:
- K3S_1500
- K3S_3090
- K3S_7100
- K3S_7110
- K3S_7130
- K3S_9047
- AR_PE1BCHS
PE2
Description:
This batch will display all products whose demand was much lower than the average in the last period.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: PE2
Table Code Description 1: Demand filter low check
Table Flag 1: 1
Table Flag 3: 1
Program Used In:
- K3S_1500
- K3S_3090
- AR_PE2BCHS
PE3
Description:
This batch will display all products whose demand has been above average for the past several periods
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: PE3
Table Code Description 1: Tracking signal trending up
Table Flag 1: 1
Table Flag 3: 1
Program Used In:
- K3S_1500
- K3S_3090
- AR_PE3BCHS
PE4
Description:
This batch will display all products whose demand has been below average for the past several periods
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: PE4
Table Code Description 1: Tracking signal trending down
Table Flag 1: 1
Table Flag 3: 1
Program Used In:
- K3S_1500
- K3S_3090
- AR_PE4BCHS
PE5
Description:
This batch will display all products which did not reach the criteria for the PE1-4 however, these products fell below their service level target last period.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: PE5
Table Code Description 1: Service level target check
Table Flag 1: 1
Table Flag 3: 1
Program Used In:
- K3S_1500
- K3S_3090
- K3S_7100
- K3S_7110
- K3S_7130
- AR_PE5BCHS
PE6
Description:
This batch is closed automatically but will show all products that are on watch.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
If Flag 5 = 1, then you would like to immediately close the batch
If Flag 5 = 0, then you would not like to immediately close the batch
Structure:
Table Code Value: PE6
Table Code Description 1: Watch products
Table Code Description 5: Flag 5=1 Automatically “C” Close this type of batch?
Table Flag 1: 1
Table Flag 3: 1
Table Flag 5: 1
Program Used In:
- K3S_FX530D
- K3S_3110
- AR_PE6BCHS
PE7
Description:
This batch is closed automatically but will show all new products.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
If Flag 5 = 1, then you would like to immediately close the batch
If Flag 5 = 0, then you would not like to immediately close the batch
Structure:
Table Code Value: PE7
Table Code Description 1: New products
Table Code Description 5: Flag 5=1 Automatically “C” Close this type of batch?
Table Flag 1: 1
Table Flag 3: 1
Table Flag 5: 1
Program Used In:
- K3S_FX530D
- K3S_3110
- AR_PE7BCHS
PE8
Description:
This batch is closed automatically but will show all manual products.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
If Flag 5 = 1, then you would like to immediately close the batch
If Flag 5 = 0, then you would not like to immediately close the batch
Structure:
Table Code Value: PE8
Table Code Description 1: Manual products
Table Code Description 5: Flag 5=1 Automatically “C” Close this type of batch?
Table Flag 1: 1
Table Flag 3: 1
Table Flag 5: 1
Program Used In:
- K3S_FX530D
- K3S_3110
- AR_PE8BCHS
PE9
Description:
This batch is closed automatically but will show all discontinued products.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
If Flag 5 = 1, then you would like to immediately close the batch
If Flag 5 = 0, then you would not like to immediately close the batch
Structure:
Table Code Value: PE9
Table Code Description 1: Discontinued products
Table Code Description 5: Flag 5=1 Automatically “C” Close this type of batch?
Table Flag 1: 1
Table Flag 3: 1
Table Flag 5: 1
Program Used In:
- K3S_FX530D
- K3S_3090
- K3S_3110
- K3S_9047
- AR_PE9BCHS
PSD
Description:
This will include all products that have a system status that is ‘Discontinued’.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: PSD
Table Code Description 1: Product System Status - Discontinued
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- AR_PSDBCHS
PSL
Description:
This will include all products that have a system status that is ‘Lumpy’.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: PSL
Table Code Description 1: Product System Status - Lumpy
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- AR_PSLBCHS
PSN
Description:
This will include all products that have a system status that is ‘New’.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: PSN
Table Code Description 1: Product System Status - New
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- AR_PSNBCHS
PSR
Description:
This will include all products that have a system status that is ‘Regular’.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: PSR
Table Code Description 1: Product System Status - Regular
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- AR_PSRBCHS
PSS
Description:
This will include all products that have a system status that is ‘Slow’.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: PSS
Table Code Description 1: Product System Status - Slow
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- AR_PSSBCHS
PUF
Description:
This will include all products that have a system status that is ‘Frozen’.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: PUF
Table Code Description 1: Product User Status - Frozen
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- AR_PUFBCHS
PUM
Description:
This will include all products that have a system status that is ‘Manual’.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: PUM
Table Code Description 1: Product User Status - Manual
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- AR_PUMBCHS
PUP
Description:
This will include all products that have a system status that is ‘Probation’.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: PUP
Table Code Description 1: Product User Status - Probation
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- AR_PUPBCHS
PUW
Description:
This will include all products that have a system status that is ‘Watch’.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: PUW
Table Code Description 1: Product User Status - Watch
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- AR_PUWBCHS
QRY
Obsolete
Q01
Description:
K3S has the capability for each customer to develop up to 99 customized Selected products review batches with type Q01 through Q99.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: Q01
Table Code Description 1:
Table Code Description 2: D
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3110
- AR_Q01BCHS
ST2
Obsolete batch type. No longer in use in R6.
ST3
Obsolete batch type. No longer in use in R6.
ST4
Obsolete batch type. No longer in use in R6.
ST5
Obsolete batch type. No longer in use in R6.
W
Description:
Filter for all W batches.
WP1
Description:
This is the weekly pattern exceptions distribution batch. This batch will contain products that have a pattern set but went 3% above or below its own daily replenishment pattern that was set.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: WP1
Table Code Description 1: Product wkly dist % excptn #1
Table Flag 1: 1
Table Flag 3: 1
Program Used In:
- K3S_3434
- K3S_3439
WP2
Description:
This product will contain products that don’t have their own daily replenishment pattern set and went 3% above or below the supplier pattern that is set.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
If Flag 5 = 1, then you would like to immediately close the batch
If Flag 5 = 0, then you would not like to immediately close the batch
Structure:
Table Code Value: WP2
Table Code Description 1: Product wkly dist % excptn #2
Table Code Description 5: Flag 5=1 Automatically “C” Close this type of batch?
Table Flag 1: 1
Table Flag 3: 1
Table Flag 5: 1
Program Used In:
- K3S_3434
- K3S_3439
WS1
Description:
This batch will contain suppliers that have a daily replenishment pattern in place but did not follow its own pattern for it went 3% above or below what was set.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: WS1
Table Code Description 1: Supplier wkly dist % excptn #1
Table Flag 1: 1
Table Flag 3: 1
Program Used In:
- K3S_3434
- K3S_3439
ZCG
Description:
This batch will include any products that may need to change to different seasonal profile because of dips and spikes.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: ZCG
Table Code Description 1: Change to a different profile
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3085
- K3S_3100
- K3S_3110
- AR_ZCGBCHS
ZNW
Description:
This batch will include any products that may need new seasonal profiles.
Note: This batch won’t pull products that already have profiles
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: ZNW
Table Code Description 1: New profile may be needed
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3085
- K3S_3100
- K3S_3110
- AR_ZNWBCHS
ZRM
Description:
This batch will include any products that may need to remove its seasonal profile.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: ZRM
Table Code Description 1: Remove current profile
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3085
- K3S_3100
- K3S_3110
- AR_ZRMBCHS
ZY1
Description:
This batch will include any seasonal profiles that are older than 1 year and will need to be reviewed.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: ZY1
Table Code Description 1: Seasonal Profile > 1 yr old
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- AR_ZY1BCHS
ZY2
Description:
This batch will include any seasonal profiles that are older than 2 years and will need to be reviewed.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: ZY2
Table Code Description 1: Seasonal Profile > 2 yrs old
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- AR_ZY2BCHS
Z00
Description:
This batch will include any seasonal profiles that with factor of 0, resulting to have a forecast of 0.
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: Z00
Table Code Description 1: Profile has factor of 0.00
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3085
- K3S_3100
- K3S_3110
- AR_Z00BCHS
Z10
Description:
Enable:
If Flag 3 = 1, then you would like to hide this batch from the user
If Flag 3 = 0, then you would like to show this batch type when creating a batch
Structure:
Table Code Value: Z10
Table Code Description 1: Profile has small factor
Table Code Description 2: Number 2 contains default
Table Flag 1: 1
Table Flag 3: 0
Program Used In:
- K3S_3100
- K3S_3110
- AR_Z10BCHS
